Scratch and Dent, T-3 Series Power Rack 91" 24"
Scratch and Dent, T-3 Series Power Rack 91" 24"
SKU: SKU: R401245
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
* Scratch and Dent items are not eligible for returns or warranty claims.*
* Scratch and Dent Deal - item may have cosmetic damage and/or missing hardware *
The T-3 Series Bolt Down Power Rack is available in both 82" and 91" heights to fit your space. Built with rugged 2" x 3" 11-gauge steel uprights, this bolt-together rack features Westside hole spacing through the bench and clean pull zones, 2" spacing above and below, 6" side hole spacing throughout each upright and your choice of powder-coat finish.
This rack comes with a standard 1.25" pull-up bar for traditional pull-ups, a 2" fat pull-up bar to challenge grip strength, and two reinforced J-Hooks built with a UHMW plastic design to protect your bar’s knurling and your upright.
Fully customizable, this modular rack is the ideal foundation for any home gym and can be expanded with a wide range of accessories, including Pin and Pipe Safeties, Adjustable Lever Arms, Roller J-Hooks, and more. Available with optional weight plate holders for easy organization.
NOTE: We recommend bolting down your rack for added stability
Specifications
Specifications
Overall Height
91-in.Max Pull-Up Bar Height
88-in.Overall Footprint
54-in x 32.75-in.Inside Depth
24-in.Outside Depth
30-in.Inside Width
42-in.Outside Width
46-in.Hole Size
11/16-in.Material
Finish
Powder-Coated BlackMaterial
2 x 3-in. 11-Ga SteelWeight
Rackable Capacity
1,100 lb.Whole Rack Capacity
4,400 lb.Product Weight
196 lb.Details
- T-3 Series 2" x 3" 11-gauge steel bolt-down uprights
- 6" side hole spacing throughout entire upright
- Westside hole spacing through the bench and clean pull zone
- (4) heavy-duty steel uprights
- (2) J-Hooks with nylon plastic included
- 1.25" Single Pull-Up Bar included
- 2" Fat Pull-Up Bar included
- Assembly hardware included
- Optional (4) Weight plate holders
- Titan recommends bolting down your rack for added stability
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.